Stelpro Canada

It appears you’re in the US. You’re currently viewing the Canadian website. Note that currencies and availability on the American and Canadian websites differ.

Vous semblez provenir des USA, mais vous êtes actuellement sur le site canadien. Veuillez noter que les devises et la disponibilité des produits diffèrent d’un site à l’autre.

Stay on the Canadian website
Rester sur le site canadien

Visit the American website
Aller sur le site américain

All Systems Operational

Since Tuesday, 23 February 2021, 04:00
Eastern Time Zone

  • logo Flextherm

ERV ‑ Energy Recovery Ventilator

Breathe better, spend less

SSALE115 New

When space is tight, the SSALE115 delivers. At just 9 inches thick, it tucks into the ceiling or hangs where other units won't fit. It brings in up to 112 CFM of fresh air and offers 64% sensible recovery, reducing heating demand in winter and cooling demand in summer. Its core rinses clean in soapy water, and the hinged door gives easy access to components. No drain, no hassle. An ideal choice for multi‑unit buildings and small to medium‑sized homes.

Product images

  • SSALE115T-F_-_lifestyle1
  • SSALE115S_-_lifestyle1
  • SSALE115S_-_angle
  • SSALE115S_-_front
  • SSALE115T_-_angle
  • SSALE115S_-_detail1
  • SSALE115T-F_-_angle
  • SSALE115T-F_-_angle1

AIR FLOW AND PERFORMANCE

  • Fully adjustable air flow (112 cfm at 0.1 in. w.g.)
  • 64% sensible recovery effectiveness at 0 °C (32 °F) 30 L/s

VOLTAGE

  • 120V, 60 Hz, 0.8A, 66W

BENEFIT

  • Reduces heating demand in winter and cooling demand in summer
  • Ultra‑quiet: factory calibrated and balanced
  • Easy installation and maintenance
  • Designed and manufactured in Canada to operate in variable climatic conditions

CONSTRUCTION

  • Door and housing in corrosion‑resistant galvanized steel, 24‑gauge, pre‑painted neutral white
  • Convenient, screwless hinged door
  • Ultra‑thin: 9 in. (229 mm)
  • No drain required
  • Lightweight for ease of installation: 32 lb (14.5 kg)
  • Duct connections size: 5 in. (127 mm)
  • Merv8 charcoal polyester filters. Merv13 filters in option (SA‑FI‑M13)
  • Two configurations to optimize your space: Side Port or Top Port models
  • Reverse air flow configuration available as a factory installed option (‑R). For further explanation, please refer to the document Normal and Reverse
  • Foam for ceiling installation for Top Port models only, available as a factory installed option (‑F)
  • Stale air exhaust requires a backdraft damper (not included)

MOTOR

  • Two high‑efficiency sealed motors with closed housing and automatic thermal protection
  • Balancing without flow keys. 100% electronic adjustment
  • Integrated pressure ports on the door for quick and accurate balancing

ENERGY RECOVERY CORE

  • High‑efficiency, highly durable 100% polymer core
  • Recovers both latent and sensible energy. (Heat and Humidity)
  • Meets or exceeds ASHRAE 90.1‑2010 requirements
  • Washable with soapy water to restore full performance without degradation or contamination
  • Antimicrobial protection ‑ ISO846
  • No virus transfer – tested per ASTM F1671
  • Zero cross‑contamination – certified per AHRI 1060
  • Flammability tested – UL 94 HB

CONTROL

  • 2 control choices available:
    • Optional Decora‑style wall‑mounted control/timer (SA‑LT15). INTERMITTENT (20‑40) – CONTINUOUS – OFF – Timer (20‑40‑60 minutes)
    • Optional digital Decora‑style wall‑mounted control/timer (SA‑LCD15). INTERMITTENT (20‑40) – CONTINUOUS – Humidity – Recirculation – OFF

INSTALLATION

  • Can be ceiling‑mounted or suspended
  • Easily installed in the ceiling void or just below the fire‑rated ceiling
  • Set of nylon suspension straps included for installation
  • Steel mounting plate for Top Port with foam models only, available as an option (SA‑P5)
  • Furnace interconnect plug connector, included

SETTING (AIR FLOW)

  • Balance the unit using the supplied instructions
  • All the installer needs are the required flow rates, a manometer, and 5 minutes to adjust and balance the system
  • Simply specify the air flow rates for Low Speed and High Speed
  • The static pressure of the system should ideally be less than or equal to the static pressure indicated by the graph for High Speed
  • You don’t have to worry about static pressure to limit air flow or adding flow keys as other devices. All you must do is provide ducting that doesn’t limit maximum flow, and the unit’s adjustments will allow you to fine‑tune flow rates

WARRANTY

  • Motor five‑year. Other parts except filters and pre‑filters one‑year

APPLICATION

  • The ideal solution for high‑rise apartments and small to medium‑size homes, when regulations do not require unit certification at ‑25 °C (‑13 °F)
  • Improves indoor air quality by exhausting pollutants, dust, and allergens outdoors, while supplying an equivalent amount of fresh air in the home

IMPORTANT NOTE

No controls are included with the purchase of an ERV or HRV. SA‑LT15 and SA‑LCD15 controls must be purchased separately.

Where to Find This Product

See where this product is available near you.

Notice to Quebec residents: for information on maintenance and repair, click here.