Green Cable Concrete^TM 6 Watts

MANUFACTURING

• Heating elements covered with fluoropolymer insulation for greater reliability
• Paired and twisted dual conductor design to eliminate electromagnetic fields
• Conductors shielded with a copper braid to ensure safety and robustness
• Extra-strong flexible PVC sheath to withstand concrete pouring

POWERS AND VOLTAGES

• 18 W/ft² for a 4 in. spacing at 240 V13.5 W/ft² for a 4 in. spacing at 208 V
• 12 W/ft² for a 6 in. spacing at 240 V9 W/ft² for a 6 in. spacing at 208 V

CONTROL

Electronic thermostat for heated floor (sold separately)

Note: This product must be used with a ground fault circuit interrupter (GFCI) unless not required by the national or local code in the region where it is being installed.

INSTALLATION

• Never cut the cable
• For indoor residential, commercial, institutional and industrial applications only
• Can be installed in 3 in. to 6 in. (7.6 cm to 15 cm) concrete slab or 1.5 in. to 4 in. (4 cm to 10 cm) concrete screed
• Compatible with most floor coverings*
• Can be installed with or without a wire mesh or rebar for reinforced concrete
• Supplied materials: adhesive tape rollers, 15 ft (4.5 m) floor sensor, installation guide and electrical panel label

WARRANTY

• Twenty years**

* For more information about the types of floor coverings under which you can safely install a heating cable, we strongly recommend you contact the relevant floor covering manufacturers.

**Stelpro offers a limited lifetime warranty on Green Cable Concrete^TM when installed by a certified FLEXpert. Certain conditions apply.