Construction heaters recall – PCH and UCH models

In 2009, following the amendment of CSA Standard C22.2 No. 46, Stelpro implemented a proactive prevention program to ensure the safety of its construction heaters manufactured between January 2000 and April 2009. Since April 2009, Stelpro products have been manufactured in accordance with the new standard and are safe.

Ten years on, the entire industry is conducting a recall for the same reason on the same units, for construction heaters manufactured with heating elements supplied by CCI. These elements were used in construction heaters produced by many manufacturers, including some Stelpro models. The units concerned pose an electric arcing and fire risk. The industry public safety notice is available online.

The Stelpro models affected by this recall were manufactured between January 2000 and April 2009:

No other Stelpro device or model is affected by this recall.

If you believe you still have one of the models covered by this recall and it is still in use, please complete the form below. We urge you to validate your unit even if it was secured as part of the 2009 prevention program.

Verify if your device is one of the recalled models:

1. Locate the nameplate on the back of the unit.

2. Make sure your heater is a STELPRO or UNIWATT brand.

3. Fill in the form below:

You will need to fill out one form per product serial number.

• Model*
  SelectPCH48TPCH4800TUCH48TUCH4800TUCH48UCH4800
• The fields in yellow indicate where to find the year:
  or
• Year*
  Select2000200120022003200420052006200720082009
• Please provide the CSA number as shown in the yellow field in the image below:
  
• CSA number*